TP-Link TD-W8960N User Manual page 57

TD-W8960N
Note:
1) Lower integer values for precedence imply higher priority for this queue relative to others.
2) The queue entry configured here will be used by the classifier to place ingress packets
appropriately.
4.4.8.2 QoS Classification
This section will guide you to create a traffic class rule to classify the upstream traffic, assign
queue which defines the precedence and the interface and optionally overwrite the IP header
DSCP byte.
A rule consists of a class name and at least one condition below. All of the specified conditions in
this classification rule must be satisfied for the rule to take effect.
Click the Add button Figure 4-45, and you can configure the QoS on the next screen.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-45
50