DigiDesign DigiRack Plug-ins Manual page 40

Create Continuous File Processes the selected re-
gions nondestructively and creates a new audio
file consisting of the selected regions consoli-
dated into a single, unbroken region. This mode
is particularly useful if you are assembling a
composite track from multiple takes. This mode
is not available when the Selection Reference is
set to Region List.
The Create Continuous File option is not
available with some time domain plug-ins.
To achieve a similar result, use the Dupli-
cate plug-in to consolidate regions processed
with these plug-ins.
Process Mode Selector
If you have made a selection that includes mul-
tiple regions, this pop-up menu lets you specify
whether AudioSuite processing is performed on
a region-by-region, or entire-selection basis.
Process Mode selector (Invert plug-in shown)
Region by Region Analyzes each region in a se-
lection individually, rather than over the entire
multi-region selection as a whole.
Entire Selection Uses the entire selection for
analysis. All regions will be analyzed and pro-
cessed relative to the entire selection.
34 DigiRack Plug-ins Guide
Chan/Track Process Mode Selector
If you have made a selection that includes re-
gions from multiple tracks, the Normalize
AudioSuite plug-in (as well as some third-party
AudioSuite plug-ins) lets you choose whether
you want to perform processing on a channel-
by-channel/track-by-track, or an all-chan-
nel/all-tracks basis using the Chan/Track Process
Mode selector.
Chan/Track Process Mode selector pop-up menu
(Normalize plug-in shown)
Peak On Each Chan/Track Analyzes and pro-
cesses each selected track individually. If you ap-
ply the Normalize plug-in to multiple tracks or a
multichannel track in Peak On Each Chan/Track
mode, each channel or track will be normalized
independently, without regard to the other se-
lected tracks.
Peak On All Chans/Tracks Uses all currently se-
lected channels and tracks for analysis. If you
apply the Normalize plug-in to a multichannel
track or multiple tracks in Peak On All
Chans/Tracks mode, the tracks will be analyzed
as a single entity and regions will be normalized
relative to the averaged peak level within all se-
lected channels and tracks.