Gain; Reverse; Signal Generator - DigiDesign DigiRack Plug-ins Manual

Gain

The Gain plug-in boosts or lowers a selected re-
gion's amplitude by a specific amount. Use it to
smooth out undesired peaks and other dynamic
inconsistencies in audio material.
Gain plug-in
Gain Specifies the desired gain level. Set this
value by manually adjusting the Gain slider, or
by entering a numeric decibel value, or by enter-
ing a percentage.
Find Level When clicked, displays the peak am-
plitude value of the current selection.
RMS/Peak Toggle Switches the calibration of
gain adjustment between Peak or RMS modes.
Peak adjusts the gain of the input signal to the
maximum possible level without clipping. RMS
adjusts the input signal to a level consistent
with the RMS (Root-Mean-Square) value, or the
effective average level of the selected region.

Reverse

The Reverse plug-in replaces the audio with a re-
versed version of the selection.
Reverse plug-in

Signal Generator

The Signal Generator plug-in produces audio
test tones in a variety of frequencies, waveforms,
and amplitudes.
Signal Generator plug-in
The features of this plug-in are non-real-time,
but otherwise identical to its real-time counter-
part.
You can use the AudioSuite Signal Genera-
tor plug-in for musical purposes as well as
for testing purposes. For example, you might
want to add a little color to a kick drum
track by doubling it with a 50 Hz tone, us-
ing the kick track as the key input signal
gating the tone track.
Chapter 7: DigiRack AudioSuite Plug-ins 103