Looping Playback; Automating Rewire - DigiDesign DigiRack Plug-ins Manual

Looping Playback

Because Pro Tools does not offer separate loop
markers as found in other third party applica-
tions such as Reason, if you want to loop play-
back, do one of the following:
To loop playback in Pro Tools:
In the Pro Tools Time Line, select the time
1
range that you want to loop.
Begin playback by pressing the Spacebar or
2
clicking the Transport's Play button.
To loop playback within a ReWire client sequencer
With playback stopped, specify the loop
■
within the ReWire client application and begin
playback.
If you create a playback loop by making a
selection in the Pro Tools Time Line, once
playback is started, any changes made to
loop or playback markers within the Re-
Wire client application will deselect the
Pro Tools Time Line selection and remove
the loop.
124 DigiRack Plug-ins Guide

Automating ReWire

ReWire supports automation for switching in-
puts during playback.
To automate switching inputs during playback:
Set the track's automation to write.
1
Do one of the following:
2
• Change the input link pop-up menu man-
ually.
– or –
• Draw the automation in the Edit window.
For information on drawing automation,
see the Pro Tools Reference Guide.