DigiDesign DigiRack Plug-ins Manual page 27

To choose a different insert:
Click the Insert Position selector and choose
■
an insert from the pop-up menu.
Choosing an Insert from the Plug-in window
Bypassing Plug-ins
To bypass a plug-in, do one of the following:
Click the Plug-in window's Bypass button.
■
– or –
Control-click (Windows) or Command-click
■
(Mac) the plug-in's Insert button in the Mix or
Edit window.
When a plug-in insert is bypassed, the In-
sert selector in the Mix window changes its
color to blue for easy visual reference. If
some, but not all channels of an unlinked
multi-mono plug-in are bypassed, the Insert
selector appears purple.
Some channels bypassed (purple)
Bypassed (blue
)
Bypass states indicated by color
Unbypassed (gray)
Linking and Unlinking Controls on
Multi-Mono Plug-ins
When a multi-mono plug-in is used on a multi-
channel track, the controls are normally linked.
Adjusting the Gain control on one channel, for
example, will adjust it for all channels.
If necessary, you can unlink plug-in controls on
specific channels of a track and edit them inde-
pendently. You can also selectively link the con-
trols of specific channels.
Phase Invert
Channel selector
Plug-in window (multi-mono 1-Band EQ shown)
To unlink controls on a multi-mono plug-in:
Deselect the Master Link button.
■
To access controls for a specific channel:
Select the channel from the Channel selector.
■
To link the controls of specific channels:
Deselect the Master Link button if it is not al-
1
ready deselected.
Click the Link Enable buttons for the chan-
2
nels whose controls you want to link.
Chapter 3: Working with Real-Time Plug-ins
Link Enable buttons
Master Link button
21