DigiDesign DigiRack Plug-ins Manual page 59

High-Mid Peak
The High-Mid Peak band boosts or cuts frequen-
cies centered around the Frequency setting. The
width of the band is determined by the Q set-
ting.
Frequency
control
High-Mid Peak EQ
The High-Mid Gain control and its correspond-
ing graph elements are displayed on-screen in
green.
High-Mid Peak EQ control values
Control
Frequency Range
Frequency Default
Mid Peak Q Range
Mid Peak Q Default
Mid Peak Gain Range
High Shelf/High Peak
The High Shelf/Peak band is switchable between
High Shelf EQ and High Peak EQ functions. By
default, this band is set to High Shelf.
High-Shelf EQ Boosts or cuts frequencies at and
above the Frequency setting. The amount of
boost or cut is determined by the Gain setting.
The Q setting determines the shape of the shelv-
ing curve.
Q
control
Band
Enable
button
Gain
control
Value
200 Hz to 18 kHz
2 kHz
0.1 to 10.0
1.0
–18 dB to +18 dB
High Peak EQ Boosts or cuts a band of frequen-
cies centered around the Frequency setting. The
width of the affected band is determined by the
Q setting.
High Shelf EQ
button
Q
control
Band
Enable
button
Gain
control
Frequency
control
High Shelf EQ (left) and High Peak EQ (right)
The High Shelf and High Peak Gain controls and
their corresponding graph elements are dis-
played on-screen in blue.
High Shelf EQ and High Peak EQ control values
Control
Frequency Range
Frequency Default
High Shelf Q Range
High Peak Q Range
Q Default
High Shelf Gain Range
High Peak Gain Range
Chapter 6: DigiRack Real-Time TDM and RTAS Plug-ins
High Peak EQ
button
Q
control
Band
Enable
button
Gain
control
Frequency
control
Value
1.8 kHz to 20 kHz
6 kHz
0.1 to 2.0
0.1 to 10.0
1.0
–12 dB to +12 dB
–18 dB to +18 dB
53