Certificates; Declaration Of Conformity - Viessmann VITOSOL-F Service Instructions Manual

Certificates

Declaration of conformity

We, Viessmann Werke GmbH&Co KG, D-35107 Allendorf, declare as sole respon-
sible body, that the product
Vitosol-F
conforms to the following standards:
DIN 1055
EN 12975 to solar KEYMARK
In accordance with the following directives, these products are designated _:
2006/95/EC
2004/108/EC
97/23/EC
Details according to the Pressure Equipment Directive (97/23/EC):
■ Heated pressure equipment
■ Class I according to appendix II, diagram 5
■ Module A according to appendix III
■ Identification of individual devices with a content of less than 2 litres as an assembly
according to article 3 (2), subject to the installation of at least one pair
The pressure device was tested without fitted equipment (safety assembly).
The pressure device must be equipped in accordance with current national regula-
tions prior to installation and commissioning.
For the energy assessment required by the EnEV of heating and ventilation equip-
ment to DIN V 4701-10, when determining system values for the product Vitosol, the
product characteristics calculated as part of EC type testing according to the
Efficiency Directive can be used (see specification table).
Allendorf, 1 August 2010
18
Viessmann Werke GmbH&Co KG
pp. Manfred Sommer