Certificates; Declaration Of Conformity - Viessmann VITOSOL-F Service Instructions Manual

Certificates

Declaration of conformity

We, Viessmann Werke GmbH&Co KG, D-35107 Allendorf, confirm as sole respon-
sible body that the product Vitosol-F complies with the following standards:
DIN 1055-1: 2002-06
DIN 1055-4: 2005-03
DIN 1055-5: 2005-07
EN 12975 to Solar KEYMARK
In accordance with the following directives, this product is designated with _:
2006/95/EC
2004/108/EC
97/23/EC
Details according to the Pressure Equipment Directive (97/23/EC):
■ Heated pressure equipment
■ Class I according to appendix II, diagram 5
■ Module A according to appendix III
■ Identification of individual devices with a content of less than 2 litres as an assembly
according to article 3 (2), subject to the installation of at least one pair
The pressure device was tested without fitted equipment (safety equipment).
The pressure device must be equipped in accordance with current national regula-
tions prior to installation and commissioning.
For the energy assessment of heating and ventilation equipment to DIN V 4701-10,
which is required by the EnEV, when determining system values for the product
Vitosol, the product characteristics calculated as part of output testing can be
used (see specification table).
Allendorf, 01 August 2012
18
Viessmann Werke GmbH&Co KG
Authorised signatory Manfred Sommer