Certificates; Declaration Of Conformity - Viessmann VITOSOL-F Service Instructions Manual

Declaration of conformity

We, Viessmann Werke GmbH & Co KG, D-35107 Allendorf, declare as sole
responsible body, that the products
Vitosol 200-F and 300-F
conform to the following standards:
DIN 1055
EN 12975 to Solar-KEYMARK
In accordance with the following Directives, these products are designated _:
2006/95/EC
89/336/EEC
97/23/EC
Details according to the Pressure Equipment Directive (97/23/EC):
& Heated pressure equipment
& Class I according to appendix II, diagram 5
& Module A according to appendix III
& Identification of individual devices with a content of less than 2 litres as
assembly according to article 3 (2), subject to the installation of at least one
pair
The pressure device was tested without fitted equipment (safety assembly).
The pressure vessel must be equipped in accordance with current national
requirements before installation and commissioning.
The product characteristics determined as system values for the product
Vitosol product as part of EC type testing according to the Efficiency
Directive (see specification table) can be used for the energy assessment of
heating and ventilation equipment to DIN V 4701-10.
Allendorf, 01.06.08 Viessmann Werke GmbH&Co KG
pp. Manfred Sommer

Certificates

15