Table of Contents
Advertisement
7. After the upgrade completes, remove the upgrade disk.
8. Reboot the system and start the Setup program. Press
to reset the BIOS defaults. Then, use the copy of the
Setup selections you made at the beginning of this
procedure to set the options.
Note:
for example, by a power failure, see Chapter 6
for BIOS recovery information.
See "NEC CSD Bulletin Board Service" in Chapter 7 for
information about using the bulletin board (available in the
U.S. and Canada). See "NEC CSD Website" in Chapter 7 for
information about the website.
Video Drivers
Video drivers let you take advantage of your computer's
video hardware and extended graphics modes.
Your system ships with the appropriate video drivers for
Windows 95, Windows 98, or Windows NT loaded on your
hard drive.
You can change the default video resolution in Windows
Setup. You can also change the video resolution and other
video features such as refresh rates in Windows. See "Display
Properties," in Chapter 2.
Additional VGA drivers are available for a variety of
software applications through the NEC CSD BBS or the NEC
CSD website. See "NEC CSD Bulletin Board Service" in
Chapter 7. See "NEC CSD Website" in Chapter 7 for
information about the website.
4-28 Configuring the System
If the flash BIOS process is corrupted,
F5
Advertisement
Table of Contents
