When To Use Setup - NEC PowerMate SPB-Wash User Manual

Note:
write down your current setup parameters and
store the information in a safe place. This lets
you restore your system to the current
parameters if you ever need to replace the
battery.

When to Use Setup

The Setup utility lets you view and set system parameters.
Use the Setup utility program to:
T
set the time and date
T
update or check system parameters when you add or
remove expansion options
T
change or set power management features
T
correct a hardware discrepancy when the Power-On Self-
Test (POST) displays an error message and prompts you to
run Setup
T
check the installation of optional memory by comparing
the amount of memory installed with the amount of
memory displayed by Setup
T
change certain system operating parameters, such as boot
device sequence
T
configure system connections for peripherals such as a
diskette drive, hard drives, and devices connected to the
printer port and serial ports
T
customize your system with security features such as
passwords
T
set system parameters in the event that you need to replace
the CMOS battery.
We recommend that you print out or
Configuring the System 4-3