Erasing A Disc; Refreshing A Disc (Complete Erasure) - Tascam SS-CDR1 Owner's Manual

7. Once again press the front panel
(or the remote's
ENTER
Track erasure will begin.
While the operation is being executed, the screen will
indicate - and a progress bar will be displayed.
ERASE

Erasing a disc

Here is how to erase an entire CD-RW disc.
1. Press the key to access the main
MENU
screen.
2. Highlight the CD MENU, and press the front
panel dial (or the remote's
MULTI JOG
key).
3. Highlight the ERASE item, and press the front
panel dial (or the remote's
MULTI JOG
key).
A popup window will appear, allowing you to select an
item.
4. Turn the front panel
MULTI JOG
remote's cursor
§ , ¶
window show
Er ase Med i a
panel dial (or the remote's
MULTI JOG
key).

Refreshing a disc (complete erasure)

You can refresh (completely erase) a CD-RW disc.
In some cases, the SS-CDR1 will be unable to recognize a
disc for which finalization was forcibly interrupted (such
as if a power failure occurred during the operation) or a
disc that has been used by a computer. In such cases,
refreshing the disc as follows may make it recognizable by
the SS-CDR1.
1. Press the key to access the main
MENU
screen.
2. Highlight the CD MENU, and press the front
panel dial (or the remote's
MULTI JOG
key).
3. Highlight the ERASE item, and press the front
panel dial (or the remote's
MULTI JOG
key).
A popup MENU will appear.
11 − CD-RW management
dial
MULTI JOG
key).
list
MENU
ENTER
ENTER
dial (or use the
keys) to make the popup
, and press the front
ENTER
list
MENU
ENTER
ENTER
When track erasure is complete, you will return to the
CD MENU screen.
NOTE
• When you execute the track erase operation on a
disc that has already been finalized, the SS-CDR1
will unfinalize the disc before erasing the specified
track(s).
• This operation can be executed only on a disc that
was recorded as CD-DA.
A confirmation screen will appear.
5. Once again press the front panel
(or the remote's
ENTER
Disc erasure will begin.
While the operation is being executed, the screen will
indicate " and a progress bar will be displayed.
ERASE
When disc erasure is complete, you will return to the
CD MENU screen.
4. Highlight the REFRESH item, and press the
front panel
MULTI JOG
key).
ENTER
A confirmation screen will appear.
5. Once again, press the front panel
(or the remote's
ENTER
The disc refresh operation will begin.
While the operation is being executed, the screen will indi-
cate - and a progress bar will be displayed.
REFRESH
When the disc refresh operation has been completed,
you will return to the CD MENU screen.
dial
MULTI JOG
key).
dial (or the remote's
dial
MULTI JOG
key).
73
TASCAM SS-RCD1