Editing A Playlist (Cf Only); Overview; Opening The Playlist Finder Screen; Navigating In The Playlist Finder Screen - Tascam SS-CDR1 Owner's Manual

Solid state/cd stereo audio recorder
Hide thumbs Also See for SS-CDR1:
Table of Contents

Advertisement

9 − Editing a playlist (CF only)

Overview

The SS-CDR1's playlist playback functions are available if
you are using a CF card. Playlist playback is not possible
for a CD.
When you first insert a CompactFlash card into the
SS-CDR1, three empty playlists (01–03) will automatically
be created on the card. You can register audio files from
the card into these playlists, and then select the desired
playlist (the current playlist) so that its files will be played
when you specify Playlist as the play area.
To perform playlist-related operations, start by opening the
"playlist finder screen".

Opening the playlist finder screen

If the play area ("Play area" on page 24) is PLAYLIST,
make sure that the SS-CDR1 is stopped, playing, or
paused, and hold down the front panel
remote's
key) to access the playlist finder screen.
FINDER

Navigating in the playlist finder screen

The playlist finder screen will show three playlists
(
PLAYL I ST _0 1 – PLAYL I ST _03
The number of files (tracks) registered in each playlist is
shown at the right.
With the playlist finder screen displayed, turn the front panel
dial (or use the remote's cursor § , ¶ keys) to
MULTI JOG
select (highlight) the playlist that you want to operate.
In this state you can perform the following operations:
To start playback from the beginning of the playlist
Press the
key. Playback will begin, and you
PLAY
will return to the home screen.
The playlist you selected will be specified as the cur-
rent playlist.
To pause at the beginning of the playlist
Press the
key. The SS-CDR1 will pause, and
READY
return to the home screen.
The playlist you selected will be specified as the cur-
rent playlist.
62
TASCAM SS-CDR1
key (or the
MENU
).
From this screen, proceed to the "playlist menu screen"
where you can add files to a playlist or delete the entire
contents of a playlist.
From the playlist finder screen, you can also proceed to the
"playlist screen" (which shows the files in the playlist).
Select a file for operations, and then move to the "playlist
menu screen" where you can add a file to the playlist, delete
a file from the playlist, or move a file within the playlist.
To open the playlist screen
Press the front panel
MULTI JOG
the remote's
key or
ENTER
goes as follow.
Opening the playlist menu screen
Press the
key.
MENU
For details on each item in the playlist menu, refer to
"Operations in the playlist menu screen" on page 54.
dial or
key (or
˚
key. The display
cursor ¥

Advertisement

Table of Contents
loading

Table of Contents