Erasing; Erasing Tracks; Erasing A Whole Disc; Refreshing A Disc - Tascam CD-RW901 Owner's Manual

6 − After recording

Erasing

Erasing tracks

This operation erases the specified track and all sub-
sequent tracks from a recorded CD-RW disc.
NOTE
Once this operation has started, the STOP key
cannot be used to cancel it. Please check the track
range to be deleted first.
1. While stopped, press the
the front panel or the
control. Select the
ERASE TRACK?
dial or pressing the
MULTI JOG
on the remote control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE
2. Push the MULTI JOG dial or press the
key to enter the function.
The display shows
Erase XX-XX
the first track and last track to be erased).

Erasing a whole disc

When you want to erase a whole disc (all the tracks on a
disc), follow the procedure below:
NOTE
Once the operation is proceeded, the STOP key
cannot function. Please confirm before the opera-
tion.
1. While stopped, press the
the front panel or the
control. Select the
ERASE DISC?
dial or pressing the
MULTI JOG
on the remote control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE

Refreshing a disc

Refreshing the disc makes a disc usable again. This
operation destroys all data on the disc.
1. Load the disc, and the unit in stop mode, press
the ERASE/DEL key on the front panel or the
key on the remote control. Select the
ERASE
rotating the
FRESH?
the MENU (+/-) keys on the remote control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE
2. Push the dial or press the
MULTI JOG
key on the remote control to enter the function.
The display shows
Sure?

TASCAM CD-RW901
key on
ERASE/DEL
ERASE key on the remote
rotating the
keys
MENU (+/-)
key again.
ENTER
(the number of
key on
ERASE/DEL
ERASE key on the remote
by rotating the
keys
MENU (+/-)
key again.
RE-
MULTI JOG dial or pressing
key again.
ENTER
Rotate the
MULTI JOG
(+/-) key to change the track numbers you desire
to erase.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE
3. Push the dial or press the
MULTI JOG
key to operate the function.
The display shows
Sure?
To cancel the operation at this point, press the
STOP key.
4. Push the MULTI JOG dial or press the
key again to proceed the operation.
The display shows Erase
ing time. The unit starts counting down from a
time shown on the display.
5. When the tracks have been erased, Complete will
appears on the display.
2. Push the dial or press the
MULTI JOG
to enter the function. The display shows
To cancel the operation at this point, press the
key.
STOP
3. Push the MULTI JOG dial or press the
key again to proceed the operation.
The display shows Erase
ing time. The unit starts counting down from a
time shown on the display.
4. When the disc has been erased,
pears then
Blank Disc
play.
To cancel the operation at this point, press the
key.
STOP
3. Push the MULTI JOG dial or press the
key again to proceed the operation.
The display shows
Erase
ing time. The unit starts counting down from a
time shown on the display.
4. When the disc has been refreshed,
appears then
Blank disc
display.
dial or press the
MENU
key again.
ENTER
ENTER
flashing and the remain-
key
ENTER
Sure?
ENTER
flashing and the remain-
ap-
Complete
will appear on the dis-
ENTER
flashing and the remain-
Complete
will appear on the