Erasing; Erasing Tracks; Erasing A Whole Disc; Refreshing A Disc - Tascam CD-RW901MKII Owner's Manual

Professional cd rewritable recorder
Table of Contents

Advertisement

6 − After recording

Erasing

Erasing tracks

This operation erases the specified track and all sub-sequent
tracks from a recorded CD-RW disc.
NOTE
Once this operation has started, the STOP key cannot
be used to cancel it. Please check the track range to be
deleted first.
Erasing a track is only possible when the unit is in
continuous playback mode.
1. While stopped, press the
ERASE
the front panel or the
control. Select the
ERASE TRACK?
MULTI JOG
the
dial or pressing the
keys on the remote control.
To cancel the operation at this point, press the
ERASE/DEL
or the
ERASE
MULTI JOG
2. Push the
dial or press the
to enter the function.
The display shows
E r a s e X X - X X
the first track and last track to be erased).

Erasing a whole disc

When you want to erase a whole disc (all the tracks on a disc),
follow the procedure below:
NOTE
Once the operation is proceeded, the STOP key
cannot function. Please confirm before the operation.
1. While stopped, press the
front panel or the
ERASE
Select the
E R A S E D I S C ?
JOG
dial or pressing the
remote control.
To cancel the operation at this point, press the
ERASE/DEL
ERASE
or the

Refreshing a disc

Refreshing the disc makes a disc usable again. This operation
destroys all data on the disc.
1. Load the disc, and the unit in stop mode, press the
ERASE/DEL
key on the front panel or the
key on the remote control. Select the
rotating the
MULTI JOG
(+/-)
keys on the remote control.
To cancel the operation at this point, press the
ERASE/DEL
ERASE
or the
2. Push the
MULTI JOG
dial or press the
on the remote control to enter the function. The
display shows
S u r e ?
34
TASCAM CD-RW901MKII
ERASE/DEL
key on
key on the remote
rotating
MENU (+/-)
key again.
ENTER
key
(the number of
ERASE/DEL
key on the
key on the remote control.
MULTI
by rotating the
MENU (+/-)
keys on the
key again.
ERASE
R E F R E S H ?
dial or pressing the
MENU
key again.
ENTER
key
MULTI JOG
Rotate the
key to change the track numbers you desire to erase.
To cancel the operation at this point, press the
ERASE/DEL
ERASE
or the
MULTI JOG
3. Push the
dial or press the
operate the function.
The display shows
S u r e ?
To cancel the operation at this point, press the
STOP
key.
4. Push the
MULTI JOG
dial or press the
again to proceed the operation.
The display shows
Erase
time. The unit starts counting down from a time
shown on the display.
5. When the tracks have been erased, Complete will
appears on the display.
2. Push the
MULTI JOG
dial or press the
to enter the function. The display shows
To cancel the operation at this point, press the
STOP
key.
3. Push the
MULTI JOG
dial or press the
again to proceed the operation.
The display shows
Erase
time. The unit starts counting down from a time
shown on the display.
4. When the disc has been erased,
then
will appear on the display.
B l a n k D i s c
To cancel the operation at this point, press the
STOP
key.
MULTI JOG
3. Push the
dial or press the
again to proceed the operation.
The display shows
Erase
time. The unit starts counting down from a time
shown on the display.
4. When the disc has been refreshed,
then
will appear on the display.
Blank Disc
MENU (+/-)
dial or press the
key again.
ENTER
key to
ENTER
key
flashing and the remaining
ENTER
key
S u r e ?
ENTER
key
flashing and the remaining
appears
C o m p l e t e
ENTER
key
flashing and the remaining
appears
Complete

Advertisement

Table of Contents
loading

Table of Contents