Table of Contents
Advertisement
6 − Recording
BITRATE (selectable only if "mp3" is selected)
Specify the bit rate. You can choose from 64 kbps, 128
kbps, 192 kbps, 256 kbps, and 320 kbps.
7 When you have finished making settings, press
the front panel
TIME (ESC)
key) to return to the home screen.
CLR/ESC
Using the sampling rate converter
The SS-CDR1 contains a built-in sampling rate converter,
allowing you to record at a sampling rate that is different
than the sampling rate of the digital input source.
Use the menu to turn the sampling rate converter (SRC) on/
off (for details on menu operations, refer to "Operations in
the menu screens" on page 18).
1 Press the
key to access the main menu list
MENU
screen.
2 Select the REC menu.
3 Highlight the PREFERENCE item.
4 Press the front panel
˚
cursor
key) to proceed to the REC PREFER-
¥
ENCE screen.
5 Select SRC.
Monitoring the input signal
When you press the
RECORD
condition, the front panel
RECORD
will light, and the input signal will be output from the
SS-CDR1's various output jacks (headphone, analog
balanced, analog unbalanced, and digital). The meter in the
home screen will indicate the input level.
STOP key
READY key
To cancel the record-ready condition, press the
40
TASCAM SS-CDR1
key (or the remote's
key (or the remote's
key to enter the record-ready
key and
key
READY
RECORD key
key.
STOP
NOTE
The recording format setting is remembered even
when the power is turned off.
6 Turn the
dial (or use the remote's
MULTI JOG
cursor
keys) to turn the SRC setting
§ , ¶
.
OFF
7 When you have finished making the setting, press
the front panel
TIME (ESC)
key) to return to the home screen.
CLR/ESC
NOTE
•
If a digital signal whose sampling rate differs from
the sampling rate specified in the REC FORMAT
item is being received at the DIGITAL IN jack, and
you attempt to record with SRC off, an error
message (
FS UNMATCH
•
The sampling rate setting is remembered even
when the power is turned off.
TIP
•
If you simply want to monitor the input signal
without intending to record anything, press the
RECORD key without a CompactFlash card insert-
ed. The display will indicate
RECORD key will blink red.
•
To stop monitoring the input signal, press the
key.
ON
key (or the remote's
) will appear.
, and the
MON I TOR
STOP
/
Advertisement
Table of Contents
