Table of Contents
Advertisement
Playing back in monaural
You can play back a stereo audio file in monaural. In this
case, the L/R channels of the track will be mixed and out-
put from the
/
output channels.
L
R
Use the menu to make this setting (for details on menu
operations, refer to "Operations in the menu screens" on
page 18).
1 Press the
key to access the main menu list
MENU
screen.
2 Select the PLAY menu.
3 Highlight the PREFERENCE item.
4 Press the front panel
˚
cursor
key) to proceed to the PLAY PREFER-
¥
ENCE screen.
Resume Playback
If the Resume Playback mode is on, playback will begin
from the location at which playback was last stopped (the
"resume point").
The Resume point will be erased when you perform the
following operations.
Remove the media.
•
Switch the current device
•
Switch the play area.
•
Switch the play mode.
•
Modify the contents of the media (by recording, edit-
•
ing, or erasing).
Use the menu to turn the Resume function on/off (for
details on menu operations, refer to "Operations in the
menu screens" on page 18).
1 Press the
key to access the main menu list
MENU
screen.
2 Select the PLAY menu.
3 Highlight the PREFERENCE item.
4 Press the front panel
˚
cursor
key) to proceed to the PLAY PREFER-
¥
ENCE screen.
key (or the remote's
key (or the remote's
5 − Playback
5 Select MONO MIX .
6 Turn the
dial (or use the remote's
MULTI JOG
cursor
keys) to turn the setting
§ , ¶
7 When you've finished making settings, press the
front panel
TIME (ESC)
key) to return to the home screen.
ESC
NOTE
This setting is remembered even when the power is
turned off.
5 Select RESUME.
6 Turn the
dial (or use the remote's
MULTI JOG
cursor
keys) to turn the setting
§ , ¶
7 When you've finished making settings, press the
front panel
TIME (ESC)
key) to return to the home screen.
ESC
NOTE
•
This setting is remembered even when the power is
turned off.
•
If no playable track exists (e.g., if not even one
track has been registered in program mode), of
cause, the resume point cannot be made. The coun-
ter display will state
000tr 00h 00m 00s
•
If the resume point does not exist (i.e., if the time
registered as the resume point does not exist), the
beginning of the first track in the play area will be
the resume point.
/
.
ON
OFF
key (or the remote's
CLR/
/
.
ON
OFF
key (or the remote's
CLR/
.
35
TASCAM SS-CDR1
Advertisement
Table of Contents
