Erasing; Erasing Tracks; Erasing A Whole Disc; Refreshing A Disc - Tascam CD-RW900SL Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS

Erasing

Erasing tracks

This operation erases the specified track and all sub-sequent
tracks from a recorded CD-RW disc.
NOTE
Once this operation has started, the STOP key cannot
be used to cancel it. Please check the track range to be
deleted first.
Erasing track is operated only when unit is in continu-
os playback.
1. While stopped, press the
the front panel or the
ERASE
control. Select the
ERASE TRACK?
the MULTI JOG dial or pressing the
remote control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE
2. Push the MULTI JOG dial or press the
to enter the function.
The display shows
E r a s e X X - X X

Erasing a whole disc

When you want to erase a whole disc (all the tracks on a
disc), follow the procedure below:
NOTE
Once the operation is proceeded, the STOP key
cannot function. Please confirm before the operation.
1. While stopped, press the
front panel or the ERASE
Select the
E R A S E D I S C ?
dial or pressing the
JOG
control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE

Refreshing a disc

Refreshing the disc makes a disc usable again. This opera-
tion destroys all data on the disc.
1. Load the disc, and the unit in stop mode, press the
ERASE/DEL key on the front panel or the
key on the remote control. Select the
rotating the
MULTI JOG
key on the remote control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE
2. Push the dial or press the
MULTI JOG
on the remote control to enter the function. The
display shows
S u r e ?
key on
ERASE/DEL
key on the remote
rotating
SKIP key on the
key again.
ENTER key
(the number of
key on the
ERASE/DEL
key on the remote control.
by rotating the MULTI
key on the remote
SKIP
key again.
ERASE
R E F R E S H ?
dial or pressing the
SKIP
key again.
key
ENTER
6 − After recording
the first track and last track to be erased).
Rotate the
MULTI JOG
change the track numbers you desire to erase.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE
3. Push the dial or press the
MULTI JOG
operate the function.
The display shows
S u r e ?
To cancel the operation at this point, press the
key.
STOP
4. Push the dial or press the
MULTI JOG
again to proceed the operation.
The display shows Erase
time. The unit starts counting down from a time
shown on the display.
5. When the tracks have been erased,
appears on the display.
2. Push the MULTI JOG dial or press the
to enter the function. The display shows
To cancel the operation at this point, press the
STOP key.
3. Push the MULTI JOG dial or press the
again to proceed the operation.
The display shows Erase
time. The unit starts counting down from a time
shown on the display.
4. When the disc has been erased,
then will appear on the display.
B l a n k D i s c
To cancel the operation at this point, press the
key.
STOP
3. Push the MULTI JOG dial or press the
again to proceed the operation.
The display shows Erase
time. The unit starts counting down from a time
shown on the display.
4. When the disc has been refreshed,
then will appear on the display.
Blank Disc
dial or press the key to
SKIP
key again.
key to
ENTER
key
ENTER
flashing and the remaining
will
C o m p l e t e
ENTER key
S u r e ?
ENTER key
flashing and the remaining
appears
C o m p l e t e
ENTER key
flashing and the remaining
appears
Complete
 
TASCAM CD-RW900SL TASCAM CD-RW900SL