Table of Contents
Advertisement
stopped and the total elapsed time and total
remaining time while playing will not be displayed
(only the number of tracks or the track number will
be displayed, and the time display area will show
). However, the time will be displayed after all
- -
tracks have been played on the SS-CDR1.
•
In Program mode, the display area shows the
elapsed time and remaining time of the entire
program; not of the entire play area.
Power-on play
The Power-on Play function starts playback automatically
when the SS-CDR1 is powered-on.
If you turn this function on, leave the
pressed inward, and use a commercially available timer to
power-on the SS-CDR1, the media that was specified as the
current device when the power was last turned off will play
automatically.
1 Connect the SS-CDR1 to a timer so that its power
will be supplied from the timer.
Repeat playback
You can repeatedly play back all tracks in the play area, or
repeatedly play back a specified region within a track (A-B
Repeat playback).
Conventional repeat playback
If you press the remote's
REPEAT
back on, all tracks in the play area will play repeatedly (to
do this on the SS-CDR1 itself, use menu mode).
NOTE
You can use the PLAY menu item REPEAT to turn on
Repeat playback from the SS-CDR1 itself.
REPEAT will light in the display.
In this state, all tracks in the play area can be played back
repeatedly.
If you turn on Repeat playback during playback, playback
will continue, and when it reaches the end of the play area,
it will return to the beginning and continue playing. If you
turn on repeat playback while stopped, repeat playback
will begin when you press the
A-B Repeat playback
This lets you specify a desired region (A-B) within a track
that will be played back repeatedly.
1 While playing or stopped, press the remote's
key at the starting point (A) of the region that you
want to repeat.
In the home screen, the REPEAT and A- indicators will
blink.
switch
POWER
key to turn Repeat play-
key.
PLAY
A-B
5 − Playback
•
The time display mode setting is remembered even
when the power is turned off.
•
For details on the time display during recording or
in the record-ready condition, refer to "Switching
the recording time display mode" on page 44
2 Make preparations for playback.
Select the desired device, and insert media for the cur-
rent device. It is not necessary to specify the play area
or play mode.
3 Set the front panel
POWER ON PLAY switch to
PLAY position.
4 Set your timer to the desired time.
When the specified time arrives, the SS-CDR1 will be
powered-on, and playback will begin automatically.
To turn off repeat playback, press the remote's
key once again (or turn the PLAY menu item REPEAT to
the
setting).
OFF
The REPEAT indicator in the display will go dark.
NOTE
•
By using repeat playback in conjunction with Single
playback, Program playback, or Random playback,
you can repeat a single song, repeat a program, or
repeat random playback.
•
The repeat function on/off setting is remembered
even when the power is off.
NOTE
If you press the REPEAT key, the repeat play starting
point (A) will be cancelled, and
dark.
2 Once again, press the remote's
ending point (B) of the region that you want to
the
REPEAT
REPEAT
A-
and
will go
key at the
A-B
29
TASCAM SS-CDR1
Advertisement
Table of Contents
