Table of Contents
Advertisement
10 − Copying files between CD and CF card
10. Once again press the front panel
the remote's
key).
ENTER
Writing will begin.
While the operation is executing, the screen will indi-
cate
and a progress bar popup will appear.
R I P
Copying files from a data CD
Here is how to copy MP3 or WAV files from a data CD in
their existing format to a CF card.
The following procedure assumes that the CD is selected
as the current device and that the CF card which includes
the copy-source files and the CD which is the target of the
copy are inserted in the SS-CDR1.
1. Press the
key to access the main menu list
MENU
screen.
2. Highlight the CD menu, and press the front panel
dial (or the remote's
MULTI JOG
3. Highlight the RIP TO CF item, and press the front
panel
dial (or the remote's
MULTI JOG
The SS-CDR1 will automatically read the CF card.
While the data is being read, the screen will indicate
and a progress bar popup will appear.
MED I A READ
When reading is completed, a CD folder finder screen
like the following will appear.
NOTE
If a CF card is not inserted,
appear after
MED I A READ
4. Select the file (source file) that you want to copy.
As described in "Navigating in the folder finder" on
page 50, move within the finder to select the desired
folder or file. If you select a folder, all files in that fold-
er will be the source.
If you want to select more than one folder or file, repeat
the step of highlighting the desired folder or file and
pressing the
key. A check mark will be added to
CALL
the selected folder or file. You can make multiple selec-
tions only for folders or files in a single folder.
To de-select a selected folder or file, press the
once again.
70
TASCAM SS-CDR1
dial (or
MULTI JOG
key).
ENTER
key).
ENTER
popup will
CF READ
indication.
key
CALL
When writing is completed, you will return to the CD
menu screen.
NOTE
•
You can select multiple files only within the same
folder, so once you use the CALL key to select the
first folder or file, you will no longer be able to
move to a different folder.
•
If you are only selecting one folder or file, there is
no need to press the CALL key. Simply highlight the
desired folder or file, and proceed to step 5.
5. When you have selected all of the files to be copied,
hold down the front panel
remote's
key) to confirm your selection.
ENTER
When you confirm your selection, the folder finder
screen for the CF card will appear. In this screen you
can select the writing-destination.
If you have selected copy-source files that would
exceed the free space on the CF card or if the number
of source tracks exceeds the allowable number of files
on the CF card, a popup indicating
or
will appear, and you will not be able
TRACK OVER
to finish the source selection.
In this case, press the
STOP
decrease the total size or number of the source files,
and then once again hold down the front panel
dial (or the remote's
JOG
6. Select the copy-destination (target).
As described in "Navigating in the folder finder screen"
on page 50, navigate within the finder to select the
desired folder or file.
The folder or files will be written following the folder
or file you select.
The screen before copying.
dial (or the
MULTI JOG
CAPAC I TY OVER
key to close the popup,
MULTI
key).
ENTER
Cursor
Copy-source folders or
files are added here.
Advertisement
Table of Contents
