Erasing; Erasing Tracks; Erasing A Whole Disc; Refreshing A Disc - Tascam CD-RW901SL Owner's Manual

6 − After recording
IMPORTANT SAFETY PRECAUTIONS

Erasing

Erasing tracks

This operation erases the specified track and all
sub-sequent tracks from a recorded CD-RW disc.
NOTE
Once this operation has started, the STOP key cannot
be used to cancel it. Please check the track range to be
deleted first.
Erasing a track is only possible when the unit is in
continuous playback mode.
1. While stopped, press the
the front panel or the
ERASE
control. Select the
ERASE TRACK?
the MULTI JOG dial or pressing the
keys on the remote control.
To cancel the operation at this point, press the
or the
ERASE/DEL ERASE
2. Push the MULTI JOG dial or press the
to enter the function.
The display shows
E r a s e X X - X X
the first track and last track to be erased).

Erasing a whole disc

When you want to erase a whole disc (all the tracks on a
disc), follow the procedure below:
NOTE
Once the operation is proceeded, the STOP key
cannot function. Please confirm before the operation.
1. While stopped, press the
front panel or the
ERASE
Select the
E R A S E D I S C ?
JOG dial or pressing the
remote control.
To cancel the operation at this point, press the
or the
ERASE/DEL ERASE

Refreshing a disc

Refreshing the disc makes a disc usable again. This opera-
tion destroys all data on the disc.
1. Load the disc, and the unit in stop mode, press the
ERASE/DEL key on the front panel or the
key on the remote control. Select the
rotating the
MULTI JOG
(+/-) keys on the remote control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE
2. Push the dial or press the
MULTI JOG
on the remote control to enter the function. The
display shows
S u r e ?
 
TASCAM CD-RW901SL TASCAM CD-RW901SL
ERASE/DEL key on
key on the remote
rotating
MENU (+/-)
key again.
ENTER key
(the number of
ERASE/DEL key on the
key on the remote control.
by rotating the
MULTI
MENU (+/-) keys on the
key again.
ERASE
R E F R E S H ?
dial or pressing the
MENU
key again.
key
ENTER
Rotate the MULTI JOG
key to change the track numbers you desire to erase.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE
3. Push the MULTI JOG dial or press the
operate the function.
The display shows
S u r e ?
To cancel the operation at this point, press the
STOP key.
4. Push the dial or press the
MULTI JOG
again to proceed the operation.
The display shows Erase
time. The unit starts counting down from a time
shown on the display.
5. When the tracks have been erased, Complete will
appears on the display.
2. Push the dial or press the
MULTI JOG
to enter the function. The display shows
To cancel the operation at this point, press the
STOP key.
3. Push the dial or press the
MULTI JOG
again to proceed the operation.
The display shows Erase
time. The unit starts counting down from a time
shown on the display.
4. When the disc has been erased,
then will appear on the display.
B l a n k D i s c
To cancel the operation at this point, press the
key.
STOP
3. Push the MULTI JOG dial or press the
again to proceed the operation.
The display shows Erase
time. The unit starts counting down from a time
shown on the display.
4. When the disc has been refreshed,
then will appear on the display.
Blank Disc
dial or press the MENU (+/-)
key again.
ENTER key to
key
ENTER
flashing and the remaining
key
ENTER
S u r e ?
key
ENTER
flashing and the remaining
appears
C o m p l e t e
ENTER key
flashing and the remaining
appears
Complete