Supero X7DAE User Manual page 79

Chapter 4: BIOS
System Temperature: The system temperature will be displayed (in degrees in
Celsius and Fahrenheit) as it is detected by the BIOS.
Fan1-Fan8 Speeds: If the feature of Auto Fan Control is enabled, the BIOS will
automatically display the status of the fans indicated in this item.
Fan Speed Control Modes
This feature allows the user to decide how the system controls the speeds of the
onboard fans. The CPU temperature and the fan speed are correlative. When the
CPU on-die temperature increases, the fan speed will also increase, and vice versa.
If set to Server, the fan speed will be set to optimize server performance. If the
option is set to Workstation, the fan speed is set to optimize workstation perfor-
mance. Select Quiet for the fans to operate as quiet as possible. Select Disable
to disable the fan speed control function to allow the onboard fans to constantly
run at full speed (12V). The Options are: 1. Disable (Fans run at full speed.), 2.
Server, 3. Workstation, 4. Quiet.
Voltage Monitoring
The following items will be monitored and displayed:
VcoreA, VcoreB, -12V, P1V5, +3.3V, +12V, 5Vsb, 5VDD, P_VTT, Vbat
Note: In the Windows OS environment, the Supero Doctor III settings take prece-
dence over the BIOS settings. When fi rst installed, Supero Doctor III adopts the
temperature threshold settings previously set in the BIOS. Any subsequent changes
to these thresholds must be made within Supero Doctor, since the SD III settings
override the BIOS settings. For the Windows OS to adopt the BIOS temperature
threshold settings, please change the SDIII settings to be the same as those set
in the BIOS.
4-19