Onboard SCSI Activity LED
Indicators (*X7DA8 only)
There are two Onboard SCSI Activity LED
indicators on the X7DA8. DA1 indicates
the activity status of SCSI Channel A, and
DA2 indicates the activity status of SCSI
Channel B.
Onboard Power LED
There is an Onboard Power LED located
on the motherboard. When this LED is on,
the system is on. Be sure to turn off the
system and unplug the power cord before
removing or installing components. See
the layout below for the LED location.
LAN1/2
CD2 CD1
Line-In/
Line-
JPAC
Out
Mic
SIM LP IPMI
PCI-Exp x16
PCI-33MHz
CPU
PSF
J17
Fan 1
J3P
JAR
SCSI CTRL
B
320 SCSI Channel B
2-31
Chapter 2: Installation
8-pin PWR
A. SCSI Channel A Activ-
ity LED
B. SCSI Channel B Activ-
ity LED
C. Onboard PWR LED
C
A