Supero X7DAE User Manual page 39

GLAN 1/2 (Giga-bit Ethernet
Ports)
Two G-bit Ethernet ports are located
at JLAN1 on the IO backplane. This
port accepts RJ45 type cables.
Power LED/Speaker
On the JD1 header, pins 1-3 are for
a power LED and pins 4-7 are for the
speaker. See the table on the right
for speaker pin definitions. Note:
The speaker connector pins are for
use with an external speaker. If you
wish to use the onboard speaker, you
should close pins 6-7 with a jumper.
LAN1/2
CD2 CD1
A
Line-In/
Line-
JPAC
Out
Mic
SIM LP IPMI
PCI-Exp x16
PCI-33MHz
CPU
PSF
J17
Fan 1
J3P
JAR
SCSI CTRL
320 SCSI Channel B
2-19
Chapter 2: Installation
GLAN1
GLAN2
Speaker Connector
Pin Setting Defi nition
Pins 6-7 Internal Speaker
Pins 4-7 External Speaker
8-pin PWR
A. GLAN1/2
B
B. PWR LED/Speaker