Scsi Controller Enabled/Disabled; Scsi Termination Enabled/Disabled - Supero X7DAE User Manual

X7DA8/X7DAE User's Manual
SCSI Controller Enable/
Disable
Jumper JPA1 is used to enable or dis-
able the Adaptec SCSI controller. The
default setting is on pins 1-2 to enable
SCSI. See the table on the right for
jumper settings.
SCSI Termination Enable/
Disable
Jumpers JPA2/JPA3 are used to en-
able or disable termination for SCSI
Channel A (JPA2) and Channel B
(JPA3) connectors. The default setting
is open to enable termination. See the
table on the right for jumper settings.
Note: In order for the SCSI drives to
function properly, please do not change
the default setting (enabled) set by the
manufacturer.
LAN1/2
CD2 CD1
Line-In/
Line-
JPAC
Out
Mic
SIM LP IPMI
PCI-Exp x16
PCI-33MHz
CPU
PSF
J17
Fan 1
J3P
JAR
C
B
SCSI CTRL
A
320 SCSI Channel B
2-26
SCSI Enable/Disable
Jumper Settings (JPA1)
Both Jumpers Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
SCSI Term. Enable/Disable
Jumper Settings
Jumper Setting Defi nition
Open Enabled
Closed Disabled
8-pin PWR
A. SCSI Enable
B. SCSI Channel A Termi-
nation Enable
C. SCSI Channel B Termi-
nation Enable