Supero X7DAE User Manual page 24

X7DA8/X7DAE User's Manual
Installation of the Heatsink
CEK Heatsink Installation
1. Do not apply any thermal grease to
the heatsink or the CPU die-the required
amount has already been applied.
2. Place the heatsink on top of the CPU so
that the four mounting holes are aligned with
those on the retention mechanism.
3. Screw in two diagonal screws (ie the #1
and the #2 screws) until just snug (-do not
fully tighten the screws to avoid possible
damage to the CPU.)
4. Finish the installation by fully tightening
all four screws.
CEK Passive Heatsink
Screw#1
Screw#1
2-4
Screw#2
Screw#2