Mmi Filter - ATCOM AT-640 User Manual

AT-640 User Manual
the number(s) to the list as the white list rule. the configuration rule is –number,
for the settings as below.
-7049 means any incoming number is forbidden except 7049
Notice: Notice:
Notice: Notice: End with DOT (.) when set up the white list
� Limit List: Set Add/Delete Limit List. Please input the prefix of those phone
numbers which you forbid the phone to dial out. For example, if you want to
forbid those phones of 001 as prefix to be dialed out, you need input 001 in the
blank of limit list, and then you cannot dial out any phone number whose prefix
is 001. x and . are wildcard. x means matching any single digit. for example,
4xxx expresses any number with prefix 4 which length is 4 will be forbidden to
dialed out . Means matching any arbitrary number digit. For example,
expresses any number with prefix 6 will be forbidden to dialed out.
4.9. 4.9.
4.9. 4.9.
MMI MMI Filter Filter
MMI

MMI Filter

Filter
User could make some device own IP, which is pre-specified, access to the MMI
of the phone to config and manage the phone.
Add or delete the IP address segments that access to the phone. Set initial IP
address in the Start IP column, Set end IP address in the End IP column, and click
Add to add this IP segment. You can also click Delete to delete the selected IP
segment.
Notice: Notice:
Notice: Notice: Do not set your visiting IP outside the MMI filter range, otherwise, you
cannot logon through the web.
ATCOM TECHNOLOGY CO., LIMITED
6.