Mmi Filter; Audio Settings - ATCOM AT530 User Manual

AT530 User Manual

2.5.9 MMI Filter

MMI filter is used to make access limit to AT530 IP phone.
When MMI filter is enable. Only IP address within the start IP and end IP can access AT530 IP phone.

2.5.10 Audio Settings

CODEC: select the prefer CODEC; support ulaw, alaw,G729 and G7231 5.3/6.3
Signal Standard:
Input Volume:
Output Volume:
Handfree Volume:
Handdown Time:
G729 Payload Length: G729 payload length
VAD: Enable/disable Voice Activity Detection, but G.711 not supports VAD
Signal standard for different area.
Handset in volume.
Handset out volume.
Hand free volume
hand down detect time.
20/47