ATCOM AT-640 User Manual page 48

AT-640 User Manual
� Phone Number: The Number suit for this dial rule, can be set as full match or
prefix match. Full match means that if the number user dialed is completely the
same as this number, the call will use this dial-rule. Prefix match means that if
prefix of the number that the user dials is the same as the prefix, the call will use
this dial-rule, to distinguish from the full match case, you need to add "T" after
the prefix number in the phone number setting.
� Call Mode: support SIP.
� Destination (optional): call destination, can be IP or domain. Default is 0.0.0.0;
in this case the call will be routed to the Public SIP server. If you set the
destination to 255.255.255.255, then the call will be routed to the private SIP
server. Also you can key other address here to make direct IP calls.
� Port (optional): Configure the port of the destination, default is 5060 in SIP
� Alias (optional): Set up the Alias. We support four Alias as below. Alias need to
co-work with the Del Length.
� add:xxx, add prefix to the phone number, can set to reduce the dial length.
� all: xxx, replace the phone number with the xxx, can use as speed dial function.
Del, delete the first N numbers. N is set in the Del Length.
�
� rep:xxx，replace the first N numbers. N is set in the Del Length. For Example:
Use wants to place a call 8610-62281493, then you can set the phone number in the
dial rule as 010T, and set the Alias as rep:8610, and set the Del Length to 3. Then
all calls begin with 010 will be changed to 8610 xxxxxxxx.
� Suffix (optional): Configure suffix, show no suffix if not set.
Instance description as picture:
� 2T rule: if the call starts with 2, the first 2 will be deleted, and the rest number
with be sent to IAX2 Server.
� 33 rule: Dial 33 and will send 83018618 to your server. Used as speed dial
function.
� 0T rule: If the calls are begin with 0, the first 0 will be replacing by 86. Mean that
if you dial 075583018049 and AT640 will send 8675583018049 to your server.
� 179 rule: when you dial 179, the call with send to 192.168.1.179, suit for LAN
application without set up a sip server.
You can also Modify and Delete the existed Dial Peer.
ATCOM TECHNOLOGY CO., LIMITED