Default Password; Check The Phone's Ip; 7Th、 Web Settings - ATCOM AT-640 User Manual

AT-640 User Manual
16 16 16 16、
Default Default Default

Default Password

Password Password Password
There are 2 models to set the authority of web accessing and command line: Guest
model and Admin model. User could view and configure all items in Admin mode.
While guest couldn't change the SIP (1-2) and IAX2 configuration as well as server
address and port but only access and view the information. User would enter
different mode after input different user name and password:
Web Web interface: interface:
� Web Web interface: interface:
� Guest Model
Username：guest
� Admin Model：
Username：admin
Keypad Keypad password: password:
� Keypad Keypad password: password: 123
17 17 17 17、
Check Check Check Check the the the the Phone
Press the up or down navigation button to check the phone's current IP address.
7th 7th 7th、 7th Web Web Web settings Web settings settings settings
Enter AT-640 IP addresses in the web browser to go to the log on page, and key in
the username and password to access AT-640 setting page.
Default username and password is:
Administrator: Administrator:
Administrator: Administrator:
User: User: User: User:
ATCOM TECHNOLOGY CO., LIMITED
Phone' ' ' ' s s s s IP Phone Phone IP IP IP
admin admin
Username: admin admin
Username: guest guest guest guest
Password：guest
Password：admin
password: admin
password:guest guest guest guest
admin admin
admin