Speco ONSIP 02T5 User Manual page 15

'
'
O N S I P O 2 T 5 O w n e r
O N S I P O 2 T 5 O w n e r
 SNS IN
Examples of sensing devices are infrared sensors, motion sensors, heat/smoke sensors,
magnetic sensor,
(NC/NO) can be set in
sensor devices can be connected in parallel.
Pho to Coup ler
+ 12V
 RLY OUT
It is used for
activated, relay output configures a closed circuit.
A Relay output is provided for connecting alarm devices or for remote on/off devices such as light.
Relay is normal open and it will be closed upon alarm annunciation or remote on. The relay is
capable of switching 30V AC/DC, 2A.
Relay
s G u i d e
s G u i d e
Connect the two wires of the sensors to "SNS In".
etc.
Administrative mode. 10mA can be flown into sensor device. Multiple
Sen so r1+
Sen so r1-
GND
Figure 2-4. SENSOR Input connection
connecting external alarm generators such as sirens, flashing light, etc. When
Relay Switch Power Supply
1V~ 30VDC/ AC,1A
Relay1
-
+
Relay1
Figure 2-5. RELAY Output connection
NO/ NCType Op en Co llec to rTyp e
Sen so r
Devic e
Sen so r
Po wer
Sup p ly
Optional
Relay Switch
Rev.1.0 (Nov., 2011)
The sensor type
Sensor
Devic e
Sen so r
Po wer
Sup p ly
Alarm
Out
Device
Power
Sup ply(30V
~)
Alarm
Out
Device
Power
Supply
(1~30
)
VDC/AC,1A
15