2. Click direction buttons to change the area you want to mask.
3. Click "Draw Area" and then drag the mouse to draw the video mask area.
4. Click "Add" to add the mask area.
5. Return to the live to verify that the area have been drawn as shown as blocked out in the image.
To clear the video mask:
Select the mask area in the mask area list and then click the "Delete" button to delete the current video mask area.
5.3 PTZ Configuration
5.3.1 PTZ and Password Setting
Go to ConfigPTZSetting. This will let you see the following submenu.
In this submenu, PTZ flip, PTZ flip, language, auto logout time can be set.
Password Setting
If the password is set, you must enter the password every time you go to the menu of the PTZ by calling preset NO. 95. Go to
ConfigPTZSettingOthers. You can set the password of the PTZ menu.
5.3.2 Restore
It includes the function of reset and clear. Please refer to Chapter 4.6 for more details.
5.3.3 PTZ Function
PTZ function includes preset setup, cruise setup, group setup, trace setup, task setup, alarm setup, home position setup and wiper
setup. Please refer to Chapter 4.4 Dome Function for more details.
5.4 Event Setup
5.4.1 Motion Detection
Go to Event SetupMotion Detection to set motion detection alarm.
23