Table of Contents
Advertisement
Press the Cancel key as soon as you see the text
„Please press Cancel for Setup". If the phone does not
have enough information to boot it will go to the
configuration mode automatically.
Parameters
The following parameters can be set directly on the
phone:
Factory Settings
Setting this value to „on" can set all entries to the
factory defaults.
DHCP
This parameter determines whether DHCP is used or
not. In case you are selecting DHCP you do not need
to set the other fields since the DHCP will provide all
values – provided you have set it up correctly (see
above). Please note a flash update without BOOTP is
only possible with DHCP mode deactivated.
IP Address
This field contains the IP address of your phone.
Net mask
Here the net mask of the phone is set (e.g.
255.255.255.0). Ask your network administrator if you
are not sure how to set this value.
Phone Name
Here the phone name can be set (e.g. tel1234). The
default is snom100-xx-xx-xx.
IP Gateway
This is the gateway to which IP packets are sent if
they cannot be sent directly to the IP destination. This
field has nothing to do with H.323 gateway or SIP
proxy – these settings are found in the chapter
„Settings".
61
Advertisement
Table of Contents
