Changing Parallel Port
Some parallel port devices need a specific LPT in order
to function properly. If your device works, do not make
any changes.
1.
Right click My Computer, click Manage,
For 2000/XP/2003: then click Device Manager.
For Vista: click Continue, then click Device Manager.
2.
Click on the + (plus sign) in front of Ports (COM &
LPT), double click the SIIG CyberPro Parallel port
you want to change.
3.
Click the Port Settings tab.
4.
Click the down arrow next to the LPT Port Number
box, then select a parallel port that is not in use.
5.
Click OK to save the changes.
Legacy Device Support
If your parallel port device is not detected or does not
work properly, follow the steps below to enable legacy
plug and play support.
1.
Right click My Computer, click Manage,
For 2000/XP/2003: click Device Manager.
For Vista: click Continue, then click Device Manager.
2.
Click on the + (plus sign) in front of Ports (COM &
LPT), double click the SIIG CyberPro Parallel port
you want to change.
3.
Click the Port Settings tab.
4.
Check Enable legacy Plug and Play.
5.
Click OK to save the changes.
6
Need help?
Do you have a question about the CyberParallel ExpressCard and is the answer not in the manual?