Table of Contents
Advertisement
2.
Select Install the software automatically
(Recommended, then click Next.
3.
Click Continue Anyway, then click Finish.
4.
Repeat steps 1-3 to complete the driver installation.
Verify Windows 2000/XP/2003 Installation
1.
Right click My Computer, click Manage, then click
Device Manager.
2.
Click on the + (plus sign) in front of Ports (COM &
LPT), SIIG CyberPro Parallel port.... should be
displayed one time.
Windows Vista
1.
At the Found New Hardware window, insert the
driver CD, click Locate and install driver software
(recommended), then click Continue.
2.
Click Next, then click Close.
3.
Repeat step #2 to complete the driver installation.
Note: If your internet connection is enabled the
driver installation may not match the steps above
because Windows Vista operating system will use
Windows Update to install the driver for the
CyberParallel ExpressCard. In this case, verify Vista
installation as described below.
Verify Windows Vista Installation
1.
Right click My Computer, click Manage, click
Continue, then click Device Manager.
2.
Click on the + (plus sign) in front of Ports (COM &
LPT), SIIG CyberPro Parallel Port.... should be
displayed one time.
™
5
Advertisement
Table of Contents
Need help?
Do you have a question about the CyberParallel ExpressCard and is the answer not in the manual?