Table of Contents
Advertisement
n Norm
In Norm mode, the same waveforms result as described in 2.5.1. The LFO runs con-
tinuously and is not reset.
MIDI Reset
In Norm mode an LFO reset can also be triggered by a Control Change message
(#114, any data value). In this case, the LFO behaves in the same way as in modes
C2 - C32. For example, the LFO is reset to its minimum value and only one period is
generated when using triangle, sawtooth, inverted sawtooth and square-wave wave-
forms. To return to the normal mode (LFO continuously on), set the LFO Reset control
to a different mode and then back to the Norm position.
2.6 Analog Trigger
Either an audio signal applied to the TRIGGER INPUT socket or the filter input signal
(TRIGGER INPUT socket open) can be used as an analog trigger signal to activate the
envelope or generate the VCA gate voltage. The volume at which the analog trigger takes
effect depends on the selected trigger level.
24
SINE WARP 9 (English)
Advertisement
Table of Contents
