Table of Contents
Advertisement
Analog outputs
The analog outputs of the PHASE 22 system operate with music-
compatible line levels of +4 dBu (plus headroom, typically 2.2 V
RMS). Here, you can connect a mixing card, active speakers, or
amplifiers.
The PHASE 22 system has two high-quality analog outputs which can be independently
addressed. The connections are in 1/4" jack format and offer a balanced signal path to
minimize interference. The outputs can be controlled as a pair using Stereo Link, or indi-
vidually in mono, via the drivers or the PHASE Control Panel. However, you will usually
control the volumes from within the audio software application you use.
The output level of all channels is fixed at around +4 dBu and offers enough headroom,
should your production require it (including headroom, typically 2.2 V RMS).
Practical tip:Make full use of the 24-bit support of up-to-date
software applications and connected digital peripherals - even if
you are planning to "just" release your production on CD. The ad-
ditional sound quality is audibly worthwhile, both in the sum of the
signals and, above all, during digital postproduction.
22
PHASE 22 (English)
Hide quick links:
Advertisement
Table of Contents
