Output; Program Selection - TerraTec SINE WARP 9 Manual

2.7 Output

n
Volume
Controls the output volume of the Warp 9. A high volume or an excessive input level
can distort the signal. In this case, please lower the volume.
n
Distortion
The distortion effect is disabled when the switch is in the Off position. To enable the
distortion at the output of the Warp 9, switch it on here. The strength of the effect
depends on the volume setting.
n Bypass
Switches between the filtered and original signal.

2.8 Program selection

The SINE WARP 9 features 32 program memory slots organized in 2 groups (A/B) of 16
programs each. The following data is stored in a program:
n
Filter mode
n
All Modulation 1 parameters
n
ENV MOD, Cutoff and Resonance
The output settings (Volume, Distortion and Bypass) as well as the trigger levels cannot
be stored. The MIDI send and receive channel is global and is therefore shared by all 32
programs. It can be stored together with the active program number that is loaded
automatically when switching the device on.
SINE WARP 9 (English) 25