Table of Contents
Advertisement
n T
The LFO Reset is activated by trigger signals (selection: Trigger Source). A reset
affects the various waveforms differently:
o
The LFO runs continuously and starts at its minimum value when reset.
Example: Triangle
o S/H
The LFO generates a new random value with each reset. The LFO Rate
control does not have any effect in this case.
o Other waveforms
The LFO does not have any effect in this case.
n TD
o
The LFO runs continuously and starts at its minimum value when reset.
The reset is activated at the end of the trigger (e.g. Trigger Source = MIDI:
Note Off).
Example: Triangle
o S/H
The LFO generates a new random value at each start and end of a trigger.
The LFO Rate control does not have any effect in this case.
22
SINE WARP 9 (English)
Advertisement
Table of Contents
