Table of Contents
Advertisement
17. - 1 LFO RESET:
- 2 DELAY:
- 3 MODULATION:
18. TRIGGER LEVEL:
19. ENV MOD:
20. CUTOFF:
21. RESONANCE:
22. VOLUME:
23. DISTORTION:
24. BYPASS:
The rear panel:
25. FILTER OUTPUT:
26. FILTER INPUT:
27. POWER 12 VAC:
28. TRIGGER INPUT:
29. MIDI INPUT:
30. MIDI THRU:
31. MIDI OUTPUT:
SINE WARP 9 (English)
Selection of the LFO reset mode
Envelope triggering delay time
Intensity of the filter modulation (cutoff) by the modulation wheel
Trigger threshold for analog triggering
Intensity of the filter modulation (cutoff) by the envelope
Manual adjustment of the cutoff frequency
Manual adjustment of the filter resonance
Output volume
Distortion effect on/off switch
Selector for original/filtered signal at output
Output socket (1/4" mono jack)
Input socket (1/4" mono jack)
AC power
Input for analog triggering. If this socket is not used, the
FILTER INPUT signal will serve as the analog trigger signal.
The data received here is used to switch programs, trigger
the envelope and VCA and control the filter parameters.
MIDI feed-through socket
Controller data output of the edited parameters
7
Advertisement
Table of Contents
