Table of Contents
Advertisement
5.2 Initializing programs
All 32 programs can be saved with the following preset values:
MIDI channel:
1
Filter mode:
Low-pass (LP)
Trigger source:
AT (analog trigger)
ENV mode
N1 (trigger envelope at beginning of trigger)
VCA mode:
On (VCA permanently on)
LFO wave:
LFO reset:
Norm (no reset)
LFO depth:
0
MIDI mdulation:
Velocity, Key Follow, Modulation Wheel: OFF
When switching the device on, press and hold the Channel and Mode buttons at the
same time. The 32 programs will be initialized one at a time. The process is complete
when the Prog LED starts to flash. The Warp 9 will then be in normal operating mode.
SINE WARP 9 (English)
(triangle)
33
Advertisement
Table of Contents
