Table of Contents
Advertisement
1.3 Preliminary Tools
"A workman must fi rst sharpen his tools if he is to do his work well". Right
before you start the assembly, there are some tools that can't be spared.
Firstly, the most frequently-used tool is cross screwdriver by which most interior
components are fi xed. A suitable screwdriver can make the following job much
easier. Being so, does any screwdriver apply? Actually a magnetic tip one is
suggested. That is because in the process of setting up your PC, the situation
is very likely to happen: you accidentally drop the screws into the interior of the
computer. In case of this, a magnetic screwdriver helps attracting the fallen
screws that are hard to reach by hands. Some screw holes are placed where
hands can hardly reach. At this time, we need a magnetic screwdriver, too. In
addition, the size of our tool also matters. Generally, the domestic 107 cross
screwdriver is the most appropriate one. Besides, a fl at screwdriver is also
essential for installing CPU on socket 479.
I can get it done!!
When putting things together, it is necessary to adjust Jumper. In most cases,
things can be done barehanded. But there comes a time always when your
hands fail to reach in and fi x the problem. You'll thank God with a pliers on
hand which keeps you away from any annoying trouble for just setting one
JUMPER.
What is Jumper?
Jumper is something generally referred to "
Jumping wire" that utilizes the short circuit
of the pins to tune up some functions, such
as FSB (front side bus), ratio, and sound
switches adjusting.
3
Advertisement
Table of Contents
