Appendix
Install OS into Serial ATA Hard Disk
It is equipped with the powerful chipset which supports Serial ATA interface. Please note
that when loading the operating system onto a Serial ATA hard disk, there will be certain
limitations due to the limitations of the chip. Please carefully follow the procedures below
to install Windows 2000/XP/MCE.
Power on and then press <Delete> to enter BIOS during POST (Power On Self Test).
1.
Select Integrated Peripherals > OnChip IDE Device > SATA Mode>RAID.
2.
Finally, press <F10> to save the setting and exit BIOS setup.
3.
RAID Driver Installation Guide
One of the advantages of the chip is: it provides RAID 0 and 1 functions. A user could
34