Deleting An Ir Property; Capturing An Ir File; Iris Infrared/Serial Data Capture Unit; Capture Communication Settings - AMX IREdit Operation/Reference Manual

Basic Operations

Deleting An IR Property

1.
Within the Properties window select Model Name.
2.
Model Name provides a drop-down button, when selected will open the Model Manager Dialog.
3.
Within the Model Manager select the model line to be deleted.
4.
Select Delete.
5.
You will be prompted to confirm your selection. Click Yes.
6.
Afterwards you are returned to Model Manager. Click OK.

Capturing An IR File

With the use of an IRIS, IREdit can capture IRs into hand control functions specified by you.

IRIS Infrared/Serial Data Capture Unit

The IRIS Infrared Capture Unit is a stand-alone, self-contained unit captures infrared (IR) or wired-IR
function signals from an IR hand control. For operating instructions on the IRIS, refer to the IRIS Infrared
Capture Unit Instruction Manual.

Capture Communication Settings

The connected IRIS must be identified to IREdit.
1.
Select Tools > Comm Settings to open the Communication Settings dialog (see FIG. 49 on page 37).
2.
Open the Capture tab (FIG. 34):
FIG. 34 Communication Settings dialog - Capture tab
3.
Click the down arrow to open a menu where you can choose between any number of COM ports.
4.
Click OK.

Capture IR Wizard

1.
Select Tools > Comm Settings > Capture Tab to set the port location of the IRIS. Select OK.
2.
In the IR Document window, select the channel into which you want to capture.
3.
Select Tools > Capture. This will launch the IR Capture Wizard (FIG. 35):
24 IREdit IR Library Management