Function Map - AMX AXT-CV TiltScreen CATP Instruction Manual

Figure 158
Transfer type decision box
Figure 159
Start or quit decision box
Color Active Touch Panels
PRESS YES FOR BUS
YES
TRANSFER. PRESS NO
FOR RS232.
Use the send option to send a printable image of buttons and pages to a PC over
the AXlink or RS-232 connector in the CATP. The PC must be running the TPDOC
or TPDesign software program before you send the print file. Refer to the TPDOC or
TPDesign instruction manuals for more information.
YES Receives the PC file via the AXlink connector on the CATP and opens
the decision box in Figure 159.
NO Receives the PC file via the RS-232 connector in the CATP and opens
the decision box in Figure 159.
PRESS YES TO START.
YES
PRESS NO TO QUIT.
YES Sends the print file to the PC. The CATP returns to the startup page
when the file transfer is complete.
NO Cancels the file transfer and returns to the current page.

Function map

Choose the FUNCTION MAP option to open the channel code map page shown in
Figure 160
NO
NO
Touch Panel Program Reference 101