Receive File; Move Edit Bar; Print - AMX AXT-CV TiltScreen CATP Instruction Manual

Note
The receive file step is not
required if the CATP is
connected directly to the
AXCESS Control System.
Figure 156
Transfer type decision box
Caution
All files stored in the CATP
before the transfer will be
erased and cannot be
restored. The CATP will not
erase stored drawings or
symbols.
Figure 157
Continue decision box
100 Touch Panel Program Reference

Receive file

Press the RECEIVE FILE option to open the decision box in Figure 156.
PRESS YES FOR BUS
YES
TRANSFER. PRESS NO
FOR RS232.
You can receive files from a PC using the AXlink or RS-232 connector in the CATP.
The PC must be running the TPDOC or TPDesign software program before you can
send CATP drawings. Refer to TPDOC or TPDesign instruction manuals for more
information. Use the SAVE option if you want to save a file stored in the CATP.
YES Receives the PC file via the AXlink connector on the CATP and opens
the decision box in Figure 157.
NO Receives the PC file via the RS-232 connector in the CATP and opens
the decision box in Figure 157.
THIS WILL DESTROY
YES
SOME PANEL DATA.PRESS
YES TO CONTINUE.
YES Receives the PC file. During the download process, you can press the
EXIT button when the FILE TRANSFER page appears to cancel the file
transfer and return to the current page.
NO Cancels the file transfer and returns to the current page.

Move edit bar

Press the MOVE EDIT BAR option to move the Editor bar to the top or bottom of the
screen.

Print

Press the PRINT option to open the decision box in Figure 158.
NO
NO
Color Active Touch Panels