Axu-Cv (/Pb), Axu-Ca (/Pb); And Bb-Tp1 (Solid Surfaces); Axu-Cv/Pb Or Axu-Ca/Pb - AMX AXT-CV TiltScreen CATP Instruction Manual

Figure 6

AXU-CV/PB or AXU-CA/PB

and BB-TP1 UniMount Back
Box enclosure for solid
surfaces
Color Active Touch Panels
AXU-CV (/PB), AXU-CA (/PB), and BB-TP1 (solid surfaces)
Mount the AXU-CV (/PB) AXU-CV (/PB) or AXU-CA (/PB) and BB-TP1 (Figure 6)
into a solid surface:
BB-TP1 UniMount Back Box enclosure
Stud mounting
holes
1.
Cut the solid surface according to the cutout dimensions shown in Figure 7.
2.
Insert a flat head screwdriver into the release slot on the AXU-CV (/PB) or
AXU-CA (/PB)'s bezel and remove the engraved overlay.
Solid surface mounting
flanges
Knockout
AXU-CV/PB or
AXU-CA/PB bezel
Release slot
Engraved overlay
Installing the Touch Panel 7