Table of Contents
Advertisement
Figure 3
Sample AXU-CV/PB CATP
and AXCESS Control System
Note
The mouse can be used to
design CATP pages and then
be removed before
installation.
Color Active Touch Panels
Television
VCR
The CATPs use a 4-pin AXlink connector for power and data. CATPs connect to an
AXCESS Control System, AXCENT 2 Integrated AXCESS Control System, or the
AXB-EM232 Enhanced Master/RS-232 Controller. You can also connect an
optional Microsoft or Logitech serial mouse to the RS-232 (DB9 connector) inside
the AXU-CV (/PB),AXM-CV (PB), AXU-CA (PB), and AXM-CA (/PB) to design
touch panel pages and perform touch panel operations.
What's in this Manual
This manual provides basic instructions on how to perform installation and how
to use the CATP operating system.
Installing the Touch Panel
instructions.
Touch Panel Basics
system such as button types, message and editor selection bars, and
keyboards.
Design a Touch Panel Page
page, button, joystick, and bargraph.
Touch Panel Program Reference
AXU-CV/PB
RS-232 (DB9)
connector
AXlink cable
AXCESS CardFrame
Lighting
Installation, wiring, and cleaning
Basic elements associated with the CATP operating
Step-by-step instructions to create a CATP
Describes all the CATP operations.
Mouse (optional)
or internal RS-232
port
Camera
Introduction
3
Advertisement
Table of Contents
