2. Operation Guide
2.2 Editing
2.2.3 Erase All Programs
RECORD
1. Press and hold the Record button.
2. Tap the Flash buttons 1, 4, 2 and 3 in sequence while holding the Record
button. All LEDs will flash, indicating all programs stored in memory have
been erased.
2.2.4 Clear a Scene or Scenes
REC
CLEAR
13
+
1. Record enable.
2. Record a scene or scenes.
3. If you are not satisfied with the scene or scenes,
RECORD
1
you may tap the Rec Clear button while pressing
and holding the Record button, all LEDs will flash,
indicating the scenes have been cleared.
4
2
3