3. MIDI Operation & DMX Channel Setup
3.8 Clear of DMX Channel Setup
RECORD
FLASH 7
3.9 Call 12 Pre-set Programs
RECORD
1. Be sure this unit has been in Record mode.
2. Tapping Flash 7 button three times while holding
RECORD
1. Be sure this unit has been in Record mode.
2. Tapping Flash 6, 6, 8 and 8 buttons in sequence
Press and hold down Record button.
down Record button allows you to clear DMX
channel setup and resume DMX channel to factory
setting, i.e., 1-24 channel sequence.
Press and hold down Record button.
while holding down Record button allows you to
call 12 factory default programs of page 1. As a
result, all other programs will be cleared.
28